Filter
Top Products
Little Touch & Sew 67A
Table of Contents Previous Page | Next Page
11
Replacing the Machine
When you have finished sewing, you can
leave the machine in place, or you can put it
away and have a handy table for other uses.
1. Remove the machine and set it aside.
2. Lift out the panel, pulling it gently straight
up. Set the panel aside.
3. Place the machine face down in the well.
Make sure the ridge on the machine slides
into groove 2 on both sides.
4. Grasp the long side of the panel and slide
the small side into groove 1 at both sides
of the back of the table.