Filter
Top Products
43
6
Maintenance
To Start a Remote Programming Session
If you have a monitoring station
hookup, your installer may be
able to program your security
system through the telephone
line. It is not necessary for a
technician to come to your
home or business to make
changes to your system.
At your monitoring station's
prompting, you can initiate a re-
mote programming session by
following the directions to the
right.
To Start A Remote
Programing Session:
1. Press and hold the
[walk test] key for 2 seconds
until you hear two beeps.
When prompted, enter your
user code.
2. Press the
key three
times. You see:
RPS CALLBACK?
Byp=NO Home=YES
3. Press the key. The
remote programming session
begins. Normally, a remote
programming session takes
just a few minutes.