Filter
Top Products
2
User Codes
14
Maid
Code
Standard Code ___
Optional Code _X_
Active Certain Days/Times _X_
To Change Maid Days :
1. Press and hold the
[maid] key for 2 seconds un-
til you hear two beeps. You
see:
ENTER MASTER
USER CODE
2. Enter the master user code. If
you see the following display,
press the
key:
START MAID TIMER
Byp=NO Home=YES
If you do not see this display,
continue to step 3.
3. You see something like this:
SMTWTFS8 1234567
E SMTWTFS
In this example, the "" be-
low the "W" means the code
works only on Wednesdays.
(continued)
Unlike other user codes, which
work any day of the week, the
Maid Code works only on cer-
tain days of the week.
The Maid Code is a four-digit
user code that you can change
or delete like any other user
code. Your installer must have
programmed your system to
accept a Maid Code. For sys-
tems without multiple areas (as
described in Section 7), the
code is assigned to user num-
ber 13. It allows an individual
to arm and disarm the system
on specific days.
How it works. Arriving at the
building during a day when the
Maid Code is active, the maid
can disarm the system by en-
tering the Maid Code. Upon
leaving the building, the maid
can arm the system by enter-
ing the same code.
Maid Days and Times. For the
(continued)