Filter
Top Products
2
User Codes
15
specifics of how the Maid Code
was set up on your system, see
Section 8.
5. Press the number above the
letter of the day(s) you wish
to switch on or off.
6. To exit, press the
key.
To Change Maid Days
(continued):
To Start the Maid Code Timer:
1. Press and hold the
[maid] key for 2 seconds un-
til you hear two beeps. You
see:
ENTER MASTER
USER CODE
2. Enter the master user code. If
you see the following display,
press the
key:
START MAID TIMER
Byp=NO Home=YES
As the preceding section
shows, the Maid Code can be
programmed to work on certain
days of the week only. If you
prefer, however, you can set
the Maid Code to work for the
next few hours, regardless of
the day of the week. The num-
ber of hours the Maid Code
works depends upon your
system's programming.
The Temporary Maid Code is
assigned to user number 13.
See Section 8 for the specifics
Temporary
Maid Code
Standard Code ___
Optional Code _X_
Active Certain Days/Times _X_
(continued)
(continued)
Maid Code (continued)