Filter
Top Products
5
Settings
36
You hear a beeping sound
when the system is about to
arm, disarm, or sound an
alarm. The warning tone re-
minds you that time remains to
cancel the arming or disarming
sequence.
You can turn the tone on or off
by following the instructions to
the right. If the tone is on, the
action turns it off. If the tone is
off, the action turns it on.
To Turn Tone On/Off:
1. Press and hold the
[pre-warn] key for 2 seconds
until you hear two beeps.
When prompted, enter the
master user code.
If the tone is on, you see:
PREWARN ON
Byp=OK Home=CHG
2. To turn the leave the tone on,
press the
key. To
turn it off, press the
key.
If you made no changes, your
system returns to normal au-
tomatically. If you turned the
tone on or off, press the
key to exit.
How to Turn the Warning Tone On/Off