Sierra Housewares S5011 Home Security System User Manual


 
3
Arm/ Bypass
25
When you manually bypass a
zone, your security system
functions as if that zone does
not exist. Bypassed zones
are not protected.
The master user can bypass
any zone. Other users may
have limited rights to bypass
zones, depending on your
system's programming.
If your system is programmed
for quick bypassing, you do not
need to enter a user code to by-
pass zones. Follow the instruc-
tions for quick bypassing on the
next page.
Restoring bypassed zones.
If you manually bypass a 24-
hour zone, such as a
glassbreak detector, that zone
remains bypassed until you re-
store it. However, if you manu-
ally bypass a zone that is not a
24-hour zone, it is restored
when you disarm the system.
Bypassing
To Bypass a Zone:
1. When a zone is faulted, the
display reads:
FAULTED ZN ##
ZONE LOCATION
2. To bypass the zone, press the
key. You see:
ZONE NUMBER?
ENTER 2 DIGITS
3. Enter the two-digit zone
number. (For zones 1-9, en-
ter a "0" first.) You see:
TO BYPASS ZN ##
ENTER CODE NOW
4. Enter your user code.
To Restore a Bypassed Zone:
1. Repeat the procedure above.
The zone operates normally.