Sierra Housewares S5011 Home Security System User Manual


 
3
Arm/ Bypass
27
Optional Arming Features
Your system offers the optional arming features described below.
Refer to Section 8 to see which are installed on your system.
Extended Exit Delay. This feature automatically resets the exit
delay if you re-enter the building while the system is being armed.
You may re-enter four times; each time, the exit delay is reset to
its full value.
Keypad Lockout. Designed to prevent an intruder from guess-
ing a user code, this option causes the system to slow down if a
series of invalid user codes are entered. Before a new user code
can be entered, the user must wait through a delay. The delay
lengthens as more invalid codes are entered. Depending upon
your system's programming, the keypad lockout may not affect
arming.
Keyswitch Arming. This accessory (Sierra S5051 or equiva-
lent) allows you to arm and/or disarm the system with a key. Fol-
low the instructions provided with the switch.
Quick Exit. This option allows you to exit a home-armed building
without disarming and re-arming. To start the exit delay, press
and hold the
[quick exit] key for 2 seconds, enter your
user code, then exit. (Depending on your system's programming,
you may not need to enter your user code.)
Exit Termination. This option allows you to shorten the exit de-
lay to the last five seconds by pressing a button connected to
your keypad.