Filter
Top Products
1_ ST_ LL ii!!_ J_,/__::_C_i !i¸,i _ii
\
Fig. 1 Fig, 3
Discs
Fig, 2
Fig. 4
1 To install the machine in cabinet, posi-
tion machine head on cabinet platform
so that holes on bottom of machine
match those on board, Insert washers
and screws and tighten into place° (Fig
1) (Follow instructions provided with
Sears Cabinet, Screws and washers are
supplied with cabinet.)
2, A separate base and cover is available to
carry the machine when needed.
To install machine in carrying case, set
machine into base, with word FRONT in
base facing you, (Fig 2)
.
4.
Place cover on machine with word
"SEARS" on handle facing you., The
case slopes in the same direction of the
machine (Fig_ 3)
Push the speed control plug onto three-
prong connector_ Plug machine cord into
any 110-120 volt wall outlet. Turn on
power by poshing light and power switch.
(Fig, 4)
Spool pins are packed in accessory box,
Screw thread spool pins in place securely
with a screw driver, Position nylon discs
as shown in illustration.