Filter
Top Products
Fig, 1
J
Fig, 2
The light and power switch shown in
Fig. 1 provides the electric current for
the motor as wel! as the light. In order
to operate the machine, this switch
must be on,
To turn on the light, depress the
switch. If you are interrupted while
sewing and must leave the machine un-
attended, just turn off the switch and
the machine cannot be started accio
dentally,
The sewing light is located in the face
cover as shown. To replace the bulb,
turn the light off and open the face
cover, Push the bulb up and turn the
bulb counter-clockwise and remove it
from the socket.
Push a new bulb in and turn it clock-
wise.
NOTE:
First, unplug the machine prior to re-
moving and replacing the bulb. Be
awarethat the light bulb may be warm_