Filter
Top Products
There are certain types of stitches that are used more often than others in your
garment construction. Because of their frequent use, you will soon realize the
convenience offered to you by this control. The desired stitch will be obtained
by turning the Stitch Selector Dialo
All stitches printed in yellow on the dial must be sewn with Stretch Stitch Con-
tro! set at the middle position between S and L.
Stitches printed in orange on the dial may be obtained with Stretch Stitch Con-
trol set at horizontal position.
_; i i:i : i_._ili ::;TIT_2 i-i .:,,i,Ii2,
.... :_t-, _ :BT !Td:-
The setting illustrated is the one used
for most of your stitching. At this set-
ting you may make straight stitch and
straight stretch stitch.
As each stitch is dependent upon the
setting of your other controls, careful-
ly read the directions in the next sec-
tion of the book for various stitches,
JLA
21!2__-,1:ZG ST iT C H &[,} D
_: [Ci RAC;, !; ::i_-_?,i_-i S f-!TCI-!
At this setting illustrated, you may
sew a simple zigzag stitch or a rickrack
stretch stitch_