Filter
Top Products
Sta ti g to Sew
Now that you are famitiar with the controts on your machine and with the
accessories provided for the machine, you are ready to start to sew with your
new Kenmore sewing machine Below are some good habits to follow each time
you sit down to sew:
1, Test the needle it should be straight, properly set and sharp on the point. It
should be the correct size for the fabric and thread being used, Do not be
afraid to change your needle frequently. Many of the new fabrics made of
synthetic blends tend to dull the needles more easily than fabrics made of
natural fibers.
2. Before placing the material on the machine, see that the ends of the threads
have been drawn about 4 inches to the rear of the machine. Hold on to
threads during the sewing of the first 3 or 4 stitches of the seam.
3, Test the machine stitch on a scrap of fabric you plan to use. The fabric
should be double thickness. Adjust the machine for the length of stitch and
tension su itable to your fabric°
4. Fabric should be placed under the presser foot with the bulk of the material
to the left of the needle and the right edge of the material placed on the 5/8"
seam marking on the needle plate when making a simple seam.
5. Run the machine at a slow even speed. The more pressure you put on the
speed control, the faster the machine wit! sew,
6. Fasten each seam by back tacking at the beginning and end of the seam,
7. Always finish sewing each seam with the needle at its highest point°
8, Guide the fabric gently with your hand in front of the needle, Never pull or
hold the fabric in such a way that the normal feeding is altered.
9. When turning the hand wheel manually, always turn it toward you.