Filter
Top Products
Fig_2
Fig.3
Fig. I
Fig_ 4
Place thread on spool pin as shown
with thread coming from the back of
the spool. Draw thread through the
top thread guides, Holding the spool
stationary with right hand, pull the
end of the thread between the tension
discs as shown. Pull the spring wire
loop up and past the top hook until
the thread can be slipped into the
hook (See Fig° 2), When the thread is
released, the spring wire loop will re-
turn to position (See Fig. 3) with
thread in proper place. Release spool
of thread and continue to thread ma-
chine exactly as shown, Needle must
always be threaded in direction as
shown in Fig. 4,
Hold needle thread loosely in left hand
and rotate hand wheel toward you one
complete turn, Bring bobbin thread up
by pulling upper thread° (Fig, 5).