Filter
Top Products
Constantgreen lighton
in dirt sensor.
No green or red dirt
sensor lights.
PerformanceIndicator
activates.
Vacuum cleanerpicks
up moveable rugs -or-
PowerMate pushestoo
hard.
Redlight on
PowerMate.
I. Dirt passage is clogged.
2. Lenses are dirty.
I. No power to sensor board.
I. Full or dogged dust bag.
2. Dirty filters.
3. Blocked airflow passage.
4. Certain attachment tools.
I. Wrong pile height setting.
2. Suction too strong.
I. Tripped overload protector in
PowerMate.
I. Check for clogs in air passages.
2. Clean lenses.
Take to your nearest Sears Service
Center.
I. Change bag.
2. Change filters.
3. Clear blockage from airflow passage.
4. This is normal. Light should go off
when tool is removed.
I. Adjust setting.
2. Select lower Power Level.
I. Remove any items that may be
caught or jammed, then reset. If
vacuum cleaner starts and stops
again, clean agitator and end caps,
then reset.
Cord won't rewind. I. Dirty power cord. I. Clean the power cord.
2. Cord jammed. 2. Pull out cord and rewind.
Vacuum cleaner leaves I. Wrong vacuuming pattern. I. SeeVACUUMING TIPS.
marks on carpet.
Vacuum Cleaner Help Line:
1-877-531-7321
8:00am-5:OOpm EST,M-F
(U.S.A. and Canada)
- 24 -