Filter
Top Products
Always follow all safety precautions when performing maintenance to the PowerMate.
WARNING
Electrical Shack Or Personal injury Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance to
the vacuum cleaner. Fallure to do so could
result in electrical shock or personal injury
from vacuum cleaner suddenly starting.
BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT
Floor
Brush --_
Sru
Release
Pedal
2. Turn
PowerMate
upside down and
unscrew five (5)
PowerMate cover
screws.
1. Remove floor
brush from the
PowerMate.
Screws
3. Turn PowerMate right side up.
4. To remove
cover, grasp
the side latches
and puff out.
5. Unscrew two (2)
agitator cover
screwsand remove
agitator cover.
__ . Lift agitator
assembly out
and remove
worn belt.
7. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
=20 =