Filter
Top Products
5. Press the Power Level
Selection button to turn
on both the canister and
PowerMafe motors.
Power
Level Selection
0
o i
Suction Control L_<OPEN CLOSE>
®
CAUTION
DO NOT leave the PowerMate running in
one spot in the upright position for any
length of time. Damage to carpet may
occur.
ELECTRONICTOUCH CONTROL
Power Level Selection - turns on both
the Canister and PowerMate. The
button cycles through HIGH,
MEDIUM, and LOW power levels.
The canister motor always starts in HIGH
power. Press the Power Level Selection
button as needed to adjust power level.
POWER LEVELS:
H - when lit indicates the canister motor is
running at HIGH power.
M - when lit indicatesthe canister motor is
running at MEDIUM power.
L - when lit indicates the canister motor is
running at LOW power.
®
CARPET/BAREFLOOR- turns the
PowerMate motor on for cleaning of
carpets and off for cleaning of bare
floors. CARPET/BAREFLOORmode
will be indicated on the handle
display.
OFF = turns off canister and
PowerMate motors.
NOTE: When the vacuum cleaner isin
BARE FLOORmode, the wand light DOES
NOT function since no electricity flows to
the PowerMate.
NOTE: The hose handle display may have
a protective film. This film may be
removed.
-11 -