Filter
Top Products
MOTOR SAFETY FILTERCHANGING
WARNING
Electrlcal Shock Hazard
Turn off and unplug vacuum cleaner from
electrical outlet. Do not operate the
vacuum cleaner without the motor safety
filter. Be sure the filter is dry and properly
installed to prevent motor failure and/or
electrical shock.
MOTOR SAFETY FILTER
ELECTROSTATIC
This filter must be replaced when dirty. It
should be replaced regularly depending on
use conditions. The filter CANNOT be
washed as it will lose itsdust trapping abil=
ity.
NOTE: See PARTSAND FEATURESfor
Motor Safety Filter number.
1. Remove the bag as outlined in the BAG
CHANGING section.
2. Lift the rubber
retainer and pull out
motor safety filter as
shown.
_ _ 3. Replace the filter,
__ hite side out, facing
the dust bag, by
sliding it back into
place under the ribs in
the bag cavity. Tuck
Rubber _j_ filter in so that it fits
Y_ Retainer f completely under the
_--_:_ rubber retainer.
4. Replace the bag as outlined in the BAG
CHANGING section.
EXHAUST FILTER CHANGING
WARNING
Fire and/or Electrlcal Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter installed.
Do not operate without filter cover
installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose itsdust trapping ability.
NOTE: See PARTSAND FEATURESfor
exhaust filter number.
1. Press latch
down to release
the exhaust filter
cover from slot in
canister.
3. Remove the
exhaust filter
using the recess as
shown.
Filter
Cover
2. Pull filter
cover outward
to remove from
canister.
./
-18-