Sears 116.28014 Vacuum Cleaner User Manual


 
_CAUTION __
Moving parts! To reduce the risk of personal injury, DO
NOT touch the agitator when vacuum cleaner is on.
Contacting the agitator while it is rotating can cut, bruise
or cause other injuries. Always turn off and unplug from
electrical outlet before servicing.
Use caution when operating near chiidren.
HOW TO START
WARNING
Personal injury and Product Damage
Hazard
ALWAYS turn off the vacuum cleaner
before unplugglng.
The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord fo prevent
personal injury.
DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
Bot6n
del cord6n
el_ctrico"
1. Pull cord out
of canister to
desired length.
The cord will not
rewind until the
cord rewind
button is pushed.
NOTE: Toreduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. If
the plug does not fit fully inthe outlet,
reverse the plug. If it still does not fit, con-
tact a qualified electrician to installthe
proper outlet. Do not change the plug in
any way.
2. Plug the polarized power cord into a 120
Volt outlet located near the floor.
Torewind: Turn off
and unplug the
vacuum cleaner.
Hold the plug while
rewinding to
prevent damage or
injury from the
moving cord. Push
cord rewind button.
3. Lower wand from upright position by
pressing on the HANDLE RELEASE pedal.
Handle
Release
Pile Height
Indicator
4. Select a pile height setting by pressing
the HEIGHT ADJUST pedal on the rear of
the PowerMate. The pile height setting
shows on the indicator. See SUGGESTED
PiLE HEIGHT SETTINGS.
Attention: Refer to your carpet
manufacturers cleaning recommendations.
Some more delicate carpets may require
that they be vacuumed with the PowerMate
agitator turned off to prevent carpet
damage.
-10-