Sanyo KHS1852 Air Conditioner User Manual


 
Operation with the Remote Control Unit (continued)
2. Manual Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs,
press the setting buttons as described below and change the settings as
desired.
1HR.
TIMER
ON
OFF
TEMP.
FAN SPEED
MODE
ON OFF
SET
CANCEL
NIGHT
SETBACK
SET TEMP.
FLAP
STEP 1
STEP 4
STEP 3
STEP 2
STEP 5
14 OI-202-16EG
oi202000
STEP 1 Press the MODE selector button and select the
desired mode.
For heating operation
For dehumidifying operation
For cooling operation
STEP 2 To start the air conditioner, press the ON/OFF
operation button.
STEP 3 Press the TEMP. setting buttons to change the
temperature setting to the desired temperature.
Adjustable temperature range:
88 °F max. 60 °F min.
STEP 4 Set the FAN SPEED selector button to the setting you
want.
NOTE
If the fan speed is set to (Automatic), the fan
speed switches automatically, according to the
difference between the actual room temperature and
the temperature setting.
STEP 5 Press the FLAP button and set the airflow direction as
desired.
(Refer to “Adjusting the Airflow Direction” on
page 21.)
To stop the air conditioner, press the ON/OFF operation button again.