Filter
Top Products
REMINGTON QFP40 Direct Vent FIREPLACE
Page 58
250-4721 JUNE 2001
OPERATION
Read this entire manual prior to using the fireplace. Pay particular attention to the “Safety
Precautions” section on pages 6-9. Failure to follow the instructions may result in prop-
erty damage, bodily injury, or even death.
CONTROL PANEL
FAN SPEED This knob controls the speed of the internal convection blower that pushes
the heated air into the room.
MAIN BURNER ..................................... This control is used to turn the fireplace on and
off.
PILOT IGNITOR ................................... The pilot ignitor is used only to start the pilot.
When pressed, it sends an electrical charge to
the pilot assembly. This creates a blue spark
directly next to the pilot, igniting the pilot flame.
VALVE CONTROL ................................. This knob is used to control gas to the fireplace
and for starting the pilot. There are three posi-
tions, ON, OFF, & PILOT. The pointer on the
panel indicates the position of the knob.
COMFORT CONTROL .......................... This knob controls the flame height from low
(“LO”) to high (“HI”).
• If using a remote control or thermostat, the On/Off Switch must be left “OFF”.
Turning the On/Off Switch “ON” will keep the fireplace on continually.
Fan Speed
Main Burner
Ignitor
Comfort Control
Valve Control
Thermostat
Connection
OPERATION