Filter
Top Products
Regency P121-1/P121LC-1/P121RC-1/P131-1 Zero Clearance Direct Vent Gas Fireplace 25
INSTALLATION
02-80
02-80
Repeat step 3 on the opposite side of the burner.
Place Log 02-82 onto pin.
02-82
02-82
02-81
02-81
02-81
02-79
02-82
Grate Post
5) Place Log 02-82 on the middle left side of the burner. Rest the bottom
of the Log onto the second grate post from the left. Ensure that the log
fits into a pin that is on Log 02-79.
4) Embers should be placed in front of Log
02-79 and Log 02-80 and also
down the middle between the logs as shown in the image below.
Caution: Do NOT cover burner ports.
Repeat step 5 on the opposite side of the burner.
Grate Post
6) Place Log 02-81 on the middle right side of the burner. Ensure that
the log fits over the 2nd grate post from the right.
Repeat step 6 on the opposite side of the burner.