Filter
Top Products
HZ54 Regency Horizon
TM
Gas Fireplace 43
MAINTENANCE
6) Remove the burner tray by undoing the 2 screws inbetween the bot-
tom cover and burner on the fi rebox. Carefully lift the burner up and
out ensuring not to spill the glass crystals.
Aerial View of the inside of the unit shown.
MAINTENANCE
ON/OFF Connector Wires
8) Disconnect the ON/OFF connector wires from the valve.
11) Remove the valve tray by undoing 12 screws.
12) Slighty lift out valve tray.
13) Disconnect the inlet gas line.
14) Replace valve and reverse steps.
7) Remove bottom cover by undoing 3 screws securing it to the fi rebox
base, lift up and out.
Aerial View of the inside of the unit shown.
9) Disconnect the DC Sparker leads at the valve.
10) Unplug the Ignitor wire from the DC Sparker.
DC Sparker Lead
Ignitor Wire
INSTRUCTIONS BELOW FOR HZ54-NG UNIT ONLY.