Filter
Top Products
6 C3406M-D (1/07)
Description
The ICS110-CW Series Camclosure
®
integrated camera system combines an environmental cover,
back box, camera, lens, and lower dome into a small, high-security system that is quick and easy to
install. The system is perfect for a variety of indoor and outdoor applications and its versatile design
allows for multiple mounting options.
The ICS110-CW Series Camclosure integrated camera system can be installed directly to a ceiling,
wall, 4S electrical box (using the optional ICS110-AP adapter plate), or a standard plaster ring.
The system has three conduit openings: two in the base and a threaded 0.75-inch (1.91 cm) opening
in the side.
Before installing your new system, thoroughly familiarize yourself with the information in this
manual.
The following is supplied with the ICS110-CW Series Camclosure integrated camera system:
Qty Description
1 ICS110-CW Series Camclosure integrated camera system
• Cover and back box (assembled)
• Trim ring with bubble; clear bubble models include a dome liner
• Camera module
1 Black plug
1 1/8-inch hollow screwdriver bit
2 8-32 x 0.375-inch Phillips pan head screws with washers (attached to cover and back box)
3 6-32 x 0.75-inch Phillips pan head screws
2 8-32 x 0.75-inch Phillips flat head screws
2 8-32 x 0.75-inch Phillips pan head screws
MODELS
ICS110-CW-V39 Indoor/outdoor dome, vandal resistant, surface mount, smoked bubble, gray
finish, 3-9 mm varifocal lens with DC-drive auto iris
ICS111-CW-V39 Indoor/outdoor dome, vandal resistant, surface mount, clear bubble, gray
finish, 3-9 mm varifocal lens with DC-drive auto iris