Filter
Top Products
22 C3406M-D (1/07)
Service Connector
The ICS110-CW Series Camclosure integrated camera system includes a service connector that
outputs camera video. Use it at the installation site to set up the field of view and focus the camera.
Figure 14.
Service Connector
Pelco offers two optional items that plug directly into the service connector. Before using either
option, you must loosen the tamper-resistant screws to remove the trim ring from the back box. Use
the supplied 1/8-inch hollow screwdriver bit.
The CST150 has a 3-foot (0.9 m) cable and microdisplay for viewing camera video. Plug it into the
service connector and view the video.
NOTE:
The three buttons on the CST150 are not used with the ICS110-CW.
The ICS090-SC has a 4-foot (1.2 m) cable with a service connector and a BNC connector. Plug the
service connector into the unit. Then connect the other end to any standard BNC (VIDEO IN) connector
on a monitor.
SERVICE
CONNECTOR