Filter
Top Products
C603M-A (11/07) 27
Operation
Refer to the Endura WS5000 Advanced System Software Operation manual (C1624M) for details on how to access and configure the
NET5301T-I video encoder.
FRONT PANEL INDICATORS
Figure 24. NET5301T-I Front Panel
Pelco badge (power): The Pelco badge glows blue when the unit has power.
Unit status: Unit status is indicated by one of the following three colors:
Green: The unit is functioning normally.
Amber: The unit is in configuration mode.
Red: The unit is in an error condition.
Network status: Network status (connection and speed) is indicated by one of the following conditions:
Off: The unit is not connected to the network.
Solid amber: The unit is connected to the network using the 100BASE-T standard.
Solid red: The unit is connected to the network using the 10BASE-T standard.
NOTE: The NET5301T-I always uses the 100BASE-T standard. If the network status light is red, contact your network administrator or Endura
certified technician.
Network activity: The network activity indicator flashes whenever the video encoder is sending or receiving network data.
Video presence: Video presence is indicated by one of the following conditions:
Green: Camera video is present at the video in connector.
Red: There is no video; the camera is not functioning properly.
ì Network Connector ó Network Activity
î Power Indicator r Video Presence
ï Unit Status s Reserved
ñ Network Status
ᕡ ᕢ ᕣᕤᕥᕦ ᕧ