Filter
Top Products
8 C3433M (3/07)
SETTINGS SCREEN
Use the Settings screen to set the name and language of the IP110; configure network settings; and add,
change, or delete users and roles (permissions).
GENERAL TAB
Use the general tab to change the device name to a user-friendly name. The gerneral tab also displays the
firmware version loaded on the IP110 Camclosure.
Figure 3.
General Tab
Change the Device Name
The default name for the IP110 is Pelco Device. To change the device name do the following:
1. Double click in the Device Name field to highlight the text in the field.
2. Type a user-friendly name into the Device Name field (maximum 36 characters). A friendly name
makes it easier to recognize the device on the network. Examples of friendly names include: Front
Door, Lobby, or Parking Lot.
3. Click Save to save the device name or click Cancel to revert back to the previous device name.
FIRMWARE VERSION
DEVICE NAME