Filter
Top Products
52
1. Basic operations
1-10-7. Registering the material selection
items
Set whether or not to register the “Material selection” items of
the buses.
Refer to “1-10-1. Memory registration and recall items”.
Press the e button to light its indicator, and display the
Shot Memory menu (or Event Memory menu).
Use [F1] to display the XPT Disable sub menu.
Use [F2] to set the BKGD item, [F3] to set the Key item,
[F4] to set the PinP1 item, and [F5] to set the PinP2
item.
Off The “Material selection” items are not
registered in the memories.
On The “Material selection” items are registered
in the memories.
When the [XPT DSBL] button is pressed, its indicator
lights in red.
The materials of the “Material selection” items registered
in the buses are canceled.
1-10-8. Setting effect dissolve
(shot memory)
Switching from the current image to the image or operation
stored in the shot memory can be performed smoothly.
Press the e button to light its indicator, and display the
Shot Memory menu.
Use [F1] to display the Path sub menu.
Use [F2] to set the effect used for switching the images
using the Effect item.
Dissolve The images are switched using the dissolve
effect.
Cut The images are switched using the cut effect.
The dissolve effect duration is set in the Effect
Dissolve sub menu which is selected in the Time
menu.
Use [F3] to set the PinP bus transition using the PinP
Bus item.
Dissolve The PinP bus images are switched using the
dissolve effect.
Cut The PinP bus images are switched using the
cut effect.
Use [F4] to select the effect used for switching the
colors using the Hue Path item.
The following colors are targeted by Hue.
Colors of the color background
Colors of the borders
Colors of the edges
Colors of the fill matte
Short The colors are changed toward less hue on
the vectorscope.
Long The colors are changed toward more hue on
the vectorscope.
CW The Hue is changed clockwise on the
vectorscope.
CCW The Hue is changed counterclockwise on the
vectorscope.
Pressed number keys blink in green while the operation
switching is underway.
When the operation switching has been completed, the
pressed number key lights in amber.
When the Effect item is changed from “Dissolve” to “Cut”
while operation is being switched, the dissolve effect is
released, and the images are switched to the images of
the selected shot memory in an instant.
When the PinP Bus item is changed from “Dissolve” to
“Cut” while operation is being switched, the dissolve
effect is released, and the PinP images are instantly
switched to the PinP images of the selected shot
memory.
During the operation switching, the operation of the fader
lever is canceled.
During the operation switching, other stored operations
cannot be recalled.
When initiating PinP1/2 transitions, the switching process
is not stored in the memory.