Panasonic M1111TY0 -FJ Plumbing Product User Manual


 
136
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Config GPI-In Setting
Parameter
GPI-In Enable AUX Sel
Setting range
On, Off AUX1
to
4
Default value
On AUX1
GPI-In Port 1/2
Parameter
Port1Assign Port2Assign Port3Assign Port4Assign
Setting range
AUTO, CUT, KEY ON, DSK ON, PinP1 ON, PinP2 ON, FTB,
BKGD AUTO, BKGD CUT, KEY AUTO, KEY CUT, REC Still1,
REC Still2, REC Clip1, PLAY Clip1, STOP Clip1, REC Clip2,
PLAY Clip2, STOP Clip2, AUX XPT1
to
24, RED Tly DSBL,
GRN Tly DSBL, AUX Tly DSBL, No Assign
Default value
No Assign No Assign No Assign No Assign
GPI-In Port 2/2
Parameter
Port5Assign Port6Assign Port7Assign Port8Assign
Setting range
The setting range is the same as for the GPI-In Port 1/2 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out
Setting
Parameter
GPI-Out Enable AUX Tly Sel
Setting range
On, Off AUX1
to
4
Default value
On AUX1
GPI-Out Port
1/5
Parameter
Port1Assign Port2Assign Port3Assign Port4Assign
Setting range
AUTO, CUT, KEY ON, DSK ON, PinP1 ON, PinP2 ON, FTB ON,
BKGD AUTO, BKGD CUT, KEY AUTO, KEY CUT, KEY Trans,
DSK Trans, PinP1Trans, PinP2Trans, FTB Trans, RED Tly1
to
13,
GRN Tly1
to
13, AUX Tly1
to
13, Event MEM, No Assign
Default value
No Assign No Assign No Assign No Assign
GPI-Out Port
2/5
Parameter
Port5Assign Port6Assign Port7Assign Port8Assign
Setting range
The setting range is the same as for the GPI-Out Port 1/5 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out Port
3/5
Parameter
Port9Assign Port10Assign Port11Assign Port12Assign
Setting range The setting range is the same as for the GPI-Out Port 1/5 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out Port
4/5
Parameter
Port13Assign Port14Assign Port15Assign Port16Assign
Setting range The setting range is the same as for the GPI-Out Port 1/5 sub menu.
Default value
No Assign No Assign No Assign No Assign
GPI-Out Port
5/5
Parameter
Port17Assign Port18Assign Port19Assign
Setting range The setting range is the same as for the GPI-Out Port 1/5 sub menu.
Default value
No Assign No Assign No Assign
COM-Port
Parameter
Mode ()
Setting range
1 to 3
Default value
1
System Menu
Parameter
Lock
Setting range
On, Off
Default value
Off
5. Setting menu table