Filter
Top Products
45
Basic
operations
1. Basic operations
1-9-3. Setting enable/disable for the AUX1
transition
The AUX1 transition time and transition enable/disable can be
set.
Press the t button to light its indicator, and display the
Time menu.
Use [F1] to display the AUX1 BUS Trans sub menu.
When the transition time is to be set in frame units, use
[F4] for the setting.
When the transition time is to be set in second units,
use [F3] to set the seconds and [F4] to set the frames.
Any time from 0 to 999f can be set. The time which can
be set when seconds are used as the display unit differs
depending on the system format.
59.94i: max. 33s09f 59.94p: max. 16s39f
50i: max. 39s24f 50p: max. 19s49f
24PsF: max. 41s15f 23.98PsF: max. 41s15f
Use [F5] to set enable or disable for the transition using
the Transition item.
Enable Enable
Disable Disable
When disable has been set for the transition, the output
signals are switched with no transition when the output
signals set in AUX1 is switched.