Filter
Top Products
13.3.2.1. Removal of Cabinet Top Plate
and Cabinet Front Plate
1. Remove the screws (three: two on the right side and one on
the left side) and the Cabinet Top Plate.
2. Remove the screws (six: three on the upper side and
another three on the lower side) on the Cabinet Front Plate.
Fig. 1
3. Release the hooks (four: two on the right and another two
on the left) of the Cabinet Front Plate and remove the Front
Plate by holding it up a little.
Fig. 2
13.3.2.2. Removal of Control Cover and
Terminal Cover
1. Remove the Front Grille according to the procedure
13.3.1.2.
2. Remove the screw (one) on the Control Cover and remove
it by sliding it downward.
Fig. 3
3. Remove the Terminal Cover by removing the screws (two)
and releasing the hooks (two).
Fig. 4
13.3.2. Disassembly of Outdoor Unit
77
CS-HE9DKE CU-HE9DKE / CS-HE12DKE CU-HE12DKE