Filter
Top Products
13.3.1.8. Removal of Front Panel Motor
1. Remove the Front Grille according to 13.3.1.1.
2. Remove the Motor by removing the screw (one). Be careful
of the Heat Exchanger Fins.
Note: Replace a plastic part of the Front Panel Motor
with a new plastic complete part for servicing in order
to avoid loss of the parts such as gear although it can
be disassembled with a precision screwdriver.
Fig. 29
Fig. 30
13.3.1.9. Removal of Ionizer
Remove the Ionizer from the Heat Exchanger by unscrewing
the screw (One) on the lower right.
Fig. 31
76
CS-HE9DKE CU-HE9DKE / CS-HE12DKE CU-HE12DKE