Filter
Top Products
4. Remove the Fan Motor Cover by removing the screws (four)
on it.
Fig. 15
5. Remove the screws (two) on the left side of the Heat
Exchanger.
Fig. 16
6. Loosen the screw (one) between the Cross-Flow Fan and
Fan Motor.
Fig. 17
7. Remove the Fan Boss by holding up the Heat Exchanger a
little.
Fig. 18
8. Pull out the Cross-Flow Fan by holding up the left side of
the Heat Exchanger.
Fig. 19
9. Pull out the Fan Motor.
Fig. 20
Fig. 21
74
CS-HE9DKE CU-HE9DKE / CS-HE12DKE CU-HE12DKE