Filter
Top Products
Installer Manual
6
INTRODUCTION TO THE ORBIT-6
The ORBIT-6 is intended to address the needs of many homes, offices, and small
businesses. Its operation is designed around microprocessor and EEPROM
(Electrically Erasable Programmable Read-Only Memory) technology, which stores,
without the need for a source of power, the system’s operating program and its
programmable parameters.
System programming may be performed from any ORBIT-6 keypad, or from a special
LCD Programming Keypad designed specifically for that.
Remote and local system programming is also possible through the use of Rokonet’s
ORBIT Upload/Download software.
Main Features:
Zones (end-of-line resistor required 2200 ohm)
• 6 Programmable Intrusion Zones
• Special type: Zone 5 – Fire Zone, Zone 6 - tamper zone
• One Fixed Panic Zone input on the keypad (not on keypad RP206KL6)
• 3 Keypad Emergency Zones (Panic, Fire, Special Emergency)
Alarm Sounder Output
• Programmable Bell/Siren or Loudspeaker Output
• Capacity: 750 mA (maximum)
Auxiliary Output for Peripheral Devices
• Capacity 250 mA (maximum)
Built-In Digital Communicator
• For Central Station communications (two phone numbers)
• For Upload/Download functions
• For follow-me functions
Keypads
• Up to 4 LED/LCD keypads can be connected
Utility Outputs
• One transistor-driven (open-collector) triggered output
Security Codes
• Two Installer Codes
• One Master (User) Code
• Nine User Codes (all may be used as duress code)
Periodic Testing
• Daily test report to central station
Optional Peripherals
• Four relay outputs expansion
• Voice Module
Event Log
• Event log of 100 events