Filter
Top Products
28
KEYPAD MESSAGES
The system is in the process of reporting a cancel signal to central station which will
cancel the alarm which it has just reported.
The system has received an acknowledgment from central station of the cancellation of
the alarm signal.
Indicates problem(s) detected on system. (See examples below and SYSTEM
TROUBLE ERROR CODES for a complete list of system troubles and corrective
actions.)
Check power transformer. Check for blown fuse or circuit breaker; general power
outage.
Battery weak. If not recharged within 24 hours, replace battery.
Communication failure to central station.
ATTEMPTING TO
CANCEL
ALARM CANCELED
**SYSTEM TRBL**
LOW BATTERY
E02-00 SERVICE
COMM FAIL
E03-00 SERVICE
AC POWER FAIL
E01-00 SERVICE
GEM-X255_OI273_USER.pub
page 28
Tuesday, September 10, 2002 13:14