Filter
Top Products
18
KEYPAD FUNCTIONS
Activate Telephone Test?
(Telephone Test programmed?
!
YES
!
NO).
Sends a
communicator test to the central station. A communication failure will be indicated
at the keypad by a system trouble “E03-FAIL TO COMM” display. Repeat the test
to attempt to correct a communication failure, as any successful communication
will clear this display.
Delay Arming 1-4 hours.
(Not for UL-listed systems.) Your system may be set to arm
automatically after a delay period of 1 to 4 hours.
To Delay Arm the system:
•
With the function “TO ARM IN 1-4 HRS“ displayed in the window, e
nter the desired
Delay Arming time in hours (
1
,
2
,
3,or 4), followed by
J
.
•
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second
warning and the keypad will begin a 15-minute arming countdown with the sounder
pulsing. The sounder may be silenced at this time by pressing
C
, but it will
turn back on with a steady warning tone 1 minute prior to arming, at which time the
building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has
been programmed as such.
ACTIVATE
DIALER TEST Y/N
TO ARM IN 1-4 HRS
PRESS 1-4 /N
GEM-X255_OI273_USER.pub
page 18
Tuesday, September 10, 2002 13:14