Filter
Top Products
26
KEYPAD MESSAGES
The keypad can display the following functional messages. Other diagnostic messages are available for the installer
or servicer. Should any unfamiliar message appear, call your dealer for service.
All zones operating; system can be armed. If displayed, “C” denotes Chime Mode on.
(
Note:
This message may have been customized by your installer.)
Panel reporting to central station on arming. If necessary, wait for ringback signal before
exiting.
Exit delay in progress. XXX denotes exit time remaining, in seconds. If displayed, “S”
indicates Service Code active; I indicates arming with Instant protection.
Entry delay in progress. XXX shows entry time remaining, in seconds.
System armed. If displayed, “I” indicates arming with Instant protection.
Zones not secured (doors or windows may be open). Faulted zone(s) will scroll.
Arming attempted with faulted zone. The display will scroll the zone faults. Secure the
zone(s) and arm system.
(With pulsing sounder.) Trouble condition on a Day Zone (followed by one or more zone
descriptions). Press the C button to silence sounder.
SYSTEM READY C
(DATE) (TIME)
EXIT TIME XXX SI
PLEASE LEAVE NOW
ENTRY TIME XXX
DISARM SYSTEM
SYSTEM ARMED I
(DATE) (TIME)
*ZONES FAULTED*
ZONES NOT NORMAL
CAN’T ARM SYSTEM
*DAY ZONE TRBL*
PLEASE WAIT
FOR RINGBACK
GEM-X255_OI273_USER.pub
page 26
Tuesday, September 10, 2002 13:14