Filter
Top Products
20
Your alarm specialist may have
programmed your system to be
monitored by a central station. The
built-in digital communicator can
transmit emergency signals and status
reports to the central station 24 hours
a day.
Communicator Features
Abort Delay. Ask your installer
which of your zones have abort delay,
a delay that enables you to reset the
system before it communicates to the
central station.
Regular Burglary (Non-24-Hour) Zone
reports are aborted by disarming
within the delay period.
24-Hour Zones and zones programmed
to report restores must be restored
first, then the panel armed and
disarmed, all within the delay period.
Opening and/or Closing Reporting.
Your system can notify the central
station every time it is disarmed or
armed. Any or all of up to 96
different users can each be
identified. If your system reports on
arming (Closing Report), the central
station will acknowledge arming.
This will signal at the keypad as a
“ringback” beep. Note: If the ringback
signal is not heard, call for service.
CENTRAL STATION MONITORING
GEM-X255_OI273_USER.pub
page 20
Tuesday, September 10, 2002 13:14