Filter
Top Products
PAGE 120 — MAYCO ST-45HRM CE PUMP — OPERATION & PARTS MANUAL — REV. #0 (02/23/04)
GREASE POINTS
ST-45HRM CE CONCRETE PUMP— LUBRICATION PANEL
NOTE
Grease daily, two or three hots
of #2 multipurpose automotive
grease. Over greasing any
bearing will not damage the
machine. ALWAYS grease
before and after
pump
operation.
POSITION LOCATION LENGTH OF LINES
A ................................................. PIVOT BRACKET GREASE POINT ................................. 41 in. (1.04 m)
B ................................................. AXLE CRANK GREASE POINT....................................... 34 in. (.86 m)
C................................................. SWING AXLE BUSHING GREASE POINT...................... 26 in. (.66 m)