Filter
Top Products
6G7 ENGINE (E-W) -
Oil Pan and Oil Pump
11A-11-2
REMOVAL SERVICE POINTS
A
A
"
OIL PAN (LOWER)
(1) Apply wood to the oil pan side an d remove the oil pan
lower with a plastic hammer.
A
B
"
OIL PAN (UPPER)
(1) Detach the bolt (1) shown at left.
(2) Detach all other bolts.
(3) Screw a bolt into bolt hole
A shown (at both ends) to
remove the oil pan.
Caution
D
Do not use a scraper or special tool to remove
the oil pan.
A
C
"
OIL PUMP OUTER AND INNER ROTORS
(1) Draw a setting mark on the oil pump outer and inner rotors
to facilitate reassembly.
INSPECTION
OIL PUMP
(1) Check for tip clearance.
Standard value: 0.06 - 0.18 mm
PWEE9615
E
Dec. 1996Mitsubishi Motors Corporation
7EN0564
1
7EN0565
A
7EN0509
Alignment marks
7EN0510