Filter
Top Products
OC277-38
<How to operate>
To change the air flow direction, press AIR DISCHARGE button.
1
Horizontal
2
20°
3
40°
45
60° SWING
(1) COOL/DRY operation
At the start-up of COOL or DRY operation, the airflow direction in automatically set to horizontal. After, it can be changed
to another direction with AIR DISCHARGE button on the remote controller.
<Auto return>
When 40° or 60° airflow is set with fan speed in LOW, “AUTO RETURN” appears right side of the air direction. One hour
later the direction changes to horizontal degrees, automatically and “AUTO RETURN” disappears.
(2) HEAT operation
At the start-up of HEAT operation, airflow direction depends on the setting of the last operation.
After, it can be changed to another direction with AIR DISCHARGE button. The airflow direction shifts to horizontal regard-
less of the remote controller settings under any of the following conditions.
● Thermostat OFF
● Defrosting
● Indoor fan speed EXTRA-LOW in hot adjustment
Available in COOL operation with fan speed on HIGH or
in HEAT operation.
Unavailable in DRY operation.
If fan speed changes from HIGH to LOW during 20°
downward airflow in COOL mode, the direction automat-
ically changes to horizontal.
Horizontal
1
20° downward
2
40° downward
3
60° downward
4
swing
5
2-5 Auto vane control
Changes by pressing
the AIR DISCHARGE
button.
FILTER
CHECK MODE
TEST RUN
TIMER OFF TIMER
CHECK SET TEMP.
CLOCK AUTO AUTO
START STOP
FAN
SPEED
SWING
AUTO
RETURN
OC277--2.qxp 1.12.14 1:42 PM Page 38