Filter
Top Products
OC277-30
(3) Auto vane control
Auto vane position is set to horizontal airflow at the start-up of COOL operation. It can then be changed by the remote con-
troller.
(a) Vane position set mode & swing mode.
( i ) Every time AIR DISCHARGE button is pressed, setting will be changed .
(ii ) Airflow direction can be changed with AIR DISCHARGE button.
When 40° degrees or 60° degrees airflow is selected with the LOW fan speed in COOL operation, “AUTO RETURN” will
appear below the temperature display. One hour later, the airflow direction returns to horizontal automatically and “AUTO
RETURN” will disappear. If the airflow direction is set to horizontal during “AUTO RETURN” indication, the time counting
for AUTO RETURN is cancelled.
1 Fan speed : LOW
2 Fan speed : HIGH
Horizontal
40°
60°
Horizontal
40°
60°
SWING
SWING
20°
holizontal
holizontal
40
20
60
AUTO RETURN AUTO RETURN
40
60
<AUTO RETURN>
1 Fan speed : LOW
2 Fan speed : HIGH
OC277--1.qxp 01.12.14 13:02 Page 30