Filter
Top Products
8.8.2 Notification Setting
BMS carries out the monitor of the state, in order to know the state of Object of BACnetIF.
Notification is the function notified to the BACnet (or Building Automation System), when the value currently
supervised exceeds a limit or it changes to an alarm value. There are COV type and EVENT in Notification.
Item Contents Target object name
COV (Change Of Value)
Notification
Example) When the [RoomTemp] value
currently supervised changes, BACnet IF
send a COV notification message to the
BMS.
All
Except for
Notification Class and Device
EVENT Notification When the decided specific conditions are
satisfied, it announces to a BMS.
Example1) When the [Alarm Signal] value
currently supervised changes to the alarm
value, BACnet IF send a notification
message to the BMS.
Example 2) When the [RoomTemp] value
currently supervised exceeds a limit,
BACnet IF sends a notification message to
the BMS.
All
Except for
Notification Class and Device
8.8.2.1 COV notification setup
The destination address of a COV notification message is setup.
The number of the address, which can be registered, is to 10.
Select the [COV Notification Settings] tab.
COV No.
Set the number
of COV
notification.
(1) Add COV notification address
Click the [Add] button. The [Notification Address] screen will open.
28