Filter
Top Products
Operating Instructions Client Reference
71
Changing Port Settings
Follow the steps to change SmartNetMonitor for Client settings, such as the proxy server settings or
IPP URL.
Note
❒ There are no settings for the NetBEUI protocol.
A
AA
A
From the [Printers] window, click the icon of the printer you want to use. On the [File] menu,
click [Properties].
B
BB
B
Click the [Ports] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
• For TCP/IP protocol, you can configure Timeout Settings.
Note
❒ If you cannot set items on the [
Recovery/Parallel Printing
] tab, follow the procedure below.
A
Click [
Cancel
] to close the [
Port Configuration:
] dialog box.
B
Start SmartNetMonitor for Client, and then right-click the SmartNetMonitor for Client icon
on the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each
port] check box.
D
Click [OK] to close the [Extended Features Settings] dialog box.
• For IPP, you can configure User Settings, Proxy Settings and Timeout Settings.
Note
❒ For more information about these settings, see SmartNetMonitor for Client Help file.