Filter
Top Products
23
to the system. Create a User I-FOB as follows:
1. Obtain a new I-FOB from your security professional (order part F-IFOB).
2. With “CREATE USER I-FOB Y/N” displayed in the LCD window, press "Y" and the
LCD wi nd ow w ill req uest to i nse rt t he new I -FO B in to t h e To uch pad .
3. After 5 seconds, the I-FOB will be programmed, and you will be prompted to remove
the I-FOB from the Touchpad.
It is recommended th at you r e cord the name of each per so n in posse ssion of each Use r
I-FO B so th at you wil l kno w whi ch I-FO B user num ber to delete from the system, as de-
scribed in the next section.
Remove I-FOB's From The System
In the event that a User I-FOB is lost, use the following procedure to remove I-FOB's
fro m t he sy st e m, ex ce pt t h e M aste r I -F OB*:
On a disa rmed sy ste m:
1. Enter the User Program Mode as descri bed ab ove.
2. Press MENU until “DELETE I-FOB Y/N” displays in the LCD window. Press YES
and "DELETE ENTRY USER I-FOB U02" will appear in the LCD window.
3. Press ENTER and the confirmation message "U02 DELETE ENTRY Y/N" will appear.
4. Press YES and after a short processing interval, the Touchpad will read "U02 DE-
LETED DELETE AGAIN Y/N". Press YES to remove another I-FOB user number
fro m the sy st e m, or pres s NO to return to the User Program Mode.
Exit the User Program Mode
•When you have completed program ming or erasing User Codes, press RESET to exit
the User Program Mode.
USER PROGRAM MODE
DELETE I-FOB Y/N
* In the event that the Master I-FOB is lost, contact the alarm company to arrange a replacement.
F-64TPG_OI320A.03_USER_2...
page 23
Friday, September 15, 2006 11:40
Composite