Filter
Top Products
50
DVB4136 Direct Vent Gas Fireplace
20012322
Arch/Square Face Kit
for the DV4136
Romanesque - Arch
41DVARFKB Black
41DVARFKR Rustic Bronze
41DVARFKS Pewter
Romanesque - Square
41DVSRFKB Black
41DVSRFKR Rustic Bronze
41DVSRFKS Pewter
Marquette - Arch
41DVAMTKB Black
41DVAMTKR Rustic Bronze
41DVAMTKS Pewter
Marquette - Square
41DVSMTKB Black
41DVSMTKR Rustic Bronze
41DVSMTKS Pewter
Battery Backup
The use of the battery backup, Model DVTBBK, will
allow your fireplace to continue operating in the event
electric power lost.
Installation Procedure
CAUTION: If the fireplace has been operating, turn
the fireplace off and allow it to cool completely before
beginning installation.
1. Open bottom louvre. Find the female terminals on
the unused red and black colored wires on the wire
harness located behind the louvre opening.
2. Connect the terminals of the supplied battery holder
to the red & black wires respectively.
3. Install four (4) fresh “AA” alkaline batteries into the
battery holder. Note correct polarity of each battery.
4. Place the battery holder on the bottom of the fire
-
place.
5. Installation complete.