Filter
Top Products
27
DVB4136 Direct Vent Gas Fireplace
20012322
2. Place the left log on the burner
by setting the log in the left front
corner of the burner up against
the brackets. Note the location
of the emboss on the log. (Fig.
50)
LG508
Left Log
Figure 50
Glowing Embers
LG463
Figure 52
Locator Pins
LG462
Figure 51
Rear Log
3. Place rear log. The rear log
sits in the firebox at an angle
toward the left over the rear
log bracket and the left side
of the burner. (Fig. 48) Set
the log on the rear log pin.
(Fig. 48) The right side of
the log sits on the rear log
bracket. Push the right side
of the log back as far as it will
go. (Fig. 51)
4. Place the glowing embers
by building them up lightly
between the fettle and the
burner tube assembly. (Fig.
52)