Filter
Top Products
68
Installation & Operation Manual
Access modes
User
The user can adjust space heating and tank target temperatures
by pressing the NAVIGATION dial when “SETPOINTS” is
flashing at the bottom of the display. The date and time, and the
temperature units can also be changed (see page 60).
Installer
Most parameters are available only to the installer, accessible
by entering the installer password, see the Knight Boiler Service
Manual.
Saving parameters (reference the Parameter Table in the
Knight Boiler Service Manual)
11 Operating information
Please note that the brackets ([]) denote
screen status.
NOTICE
To save parameters and exit programming:
Press the RIGHT SELECT [SAVE] key and then press the RIGHT
SELECT [HOME] key.
To enter a parameter and continue programming:
Press the RIGHT SELECT [SAVE] key 1 time to return to the
parameter listings; press again to return to the menu listings.
Remember to press the RIGHT SELECT [HOME] key when
finished programming in order to save the changes made.
See the Knight Boiler Service Manual for a detailed description of
parameters and access modes.