Filter
Top Products
Revision Notes: Revision A (ECO #C02428) initial release.
Revision B (ECO #C03046) reflects the addition of FIG. 5-3 on page 27,
the addition of a pressure gauge to FIG. 5-6 on page 30, edits made to
FIG. 7-1 on page 35, edits made to the Low Water Cutoff Protection
section on page 48 along with the addition of the Flow Sensing Device
section.
Revision C (ECO #C03223) reflects edits made to the high altitude
section on page 6.
Revision D (ECO #C03735) reflects edits made to the venting section
removal of B149.2, along with the addition of the hydro and dirt
separator.
Revision E (ECO #C04062) reflects changes to the terminology in all
SYNC manuals and labels from module to heat exchanger (exception:
control module), along with changing out “dirt separator” for “Y-strainer
(ECR #R02455), edits made to the ceramic fiber material warning,
removal of the stabilitor from FIG. 11-2 (C04057), and placing the
illustrations disclaimer on all the piping drawings (ECR #R02431).
Revision F (ECO #C04560) reflects the addition of Modbus to the
manual, new heat exchanger cleaning procedure, schedule 80 as
acceptable CPVC material (Table 2A) (R02799), and changes made to
Table 5A.
SYNC-I-O Rev F
10/09