Filter
Top Products
7
1
PLEASE N
OTE
PLEASE NOTE
1
Monitoring System
Rack Monitoring System
1.4
1.5
SERVICE
HOTLINE
E-MAIL
STANDARDS, REGULATIONS
AND LICENCE
LICENCE
In the event of malfunction, please first follow the instructions in the
relevant section (> 5). For all other questions, please do not hesitate to
contact LINDY technical support.
DE: 0621 / 47 005 - 0
UK: 01642 754040
IT: 031 48 40 11
FR: 0 825 825 111
CH: 061 335 97 00
USA: (256) 771-0660
Australia: 07 3262 9033
support@lindy.com
• To receive a speedy reply, please provide the following information:
– Device type
– Serial number
– Software version
– Configuration file
– Description of problem
• Please also leave your telephone number.
You will receive a qualified reply by e-mail or telephone.
The LINDY RMS has been built and tested in accordance with the rele-
vant guidelines. In connection with installation in a terminal (for exam-
ple, a rack), the additional requirements in accordance with IEC 950
must be observed and complied with.
The RMS conforms to the safety requirements of the EU Directive on
electromagnetic compatibility (EMC) (89/33/EEC) and the low voltage
Directive (73/23/EEC).
Below is a list of the standards and regulations on which the RMS is
based:
EN 55 022/Class B
EN 60 950 (IEC 950)
EN 61 000-4-2
EN 61 000-4-3
All LINUX source codes which were used to produce the product and
are subject to the GPL (see GNU Public Licence ä A4 ) can be obtained
for a service charge. This does not include the source codes of the RMS
software itself. However, the LINUX sources are freely available, for
example at URL: “http://metalab.unc.edu/pub/Linux”.