Filter
Top Products
29
Monitoring System
Rack Monitoring System
OPERATION
OPERATION
4
4.8.1
DIGITAL OUTPUTS
Input mask for the DIGITAL OUT
digital outputs settings.
Digital outputs are displayed with
the number, description, combi-
ned filters, logic operation and
effect.
F
OR CONFIGURATION WITH THE
CHIPCARD READER ONLY
If the chipcard reader has been
activated (> 4.8.7), the DIGITAL
OUT 4 output is assigned
exclusively to the door opener, in
other words it is not possible to
influence this output with the fil-
ters.
[D] D
ESCRIPTION
Description of the digital output.
[F] F
ILTER
Specify the filter(s) (> 4.9) which act(s) on a digital output.
[L] L
OGIC
Specify the logic operation with which the filters are combined.
[E] E
FFECT
State how the logic result acts on the digital output.
ON permanently switched on (independent of settings in Filter and
Logic)
OFF switched off (independent of settings in Filter and Logic)
THRU switched through
INVERT switched through in inverted fashion
[-] P
REVIOUS OUTPUT
Selection pointer to previous output.
[+] N
EXT OUTPUT
Selection pointer to next output.
[?] H
ELP
Explanation of the menu items.
[Q] Q
UIT
Jump back to the previous menu.
The menu points [D], [F], [L] and [E] are disabled for DIGITAL OUT 4
whilst, the current status of the output is displayed in the column
headed “State”.