Lindy Carbon Monoxide Alarm Carbon Monoxide Alarm User Manual


 
1
Rack
PLEASE NOTE
PLEASE NOTE
1.2.2
1.2.3
1.3
General Saftey Information
Disposal
WARRANTY
Lapse of warranty
For safe operation of the RMS please ensure you read all of this user
manual and that you observe the instructions and information contained
in it. Please also observe other documentation by manufacturers of
connected devices.
• Always keep the user manual within reach of the device.
• Ensure the rack monitoring is in perfect technical condition.
Have damage and faults remedied immediately by authorised persons.
• Only use the supplied mains cable.
• When plugging in and unplugging the mains plug,
– never pull the cable
– never touch the plug with wet hands
• When connecting devices to the cable clamps, always observe the VDE
regulations!
• Do not convert or repair the device yourself!
• Use only original accessories.
• If liquids are spilled on the device, immediately unplug the mains cable
from the mains and contact your dealer.
• Protect from heat.
Heat can damage both parts of the outside of the device and internal
circuits and components.
• To clean the device, use only cloths moistened with water or washing-
up liquid. Alcohol, thinners or similar chemicals damage the surface of
the enclosure.
The device contains a lithium battery on the circuit board and
toxic substances in the LCD display.
• The device must be disposed of properly
LINDY offers a warranty of 2 years for this products.
For further details, please see the General Terms of Business of LINDY.
The warranty is void if improper modifications are made to the device.